Menedus Valve
Safety Valve Medenus
Type : SL10
The safety relief valve SL 10 is mainly used to blow off a small amount of gas when the pressure is slowly increasing and to avoid that the safety shut-off valves releases.
The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request). The SL 10 is available with thread connections Rp 1″, Rp 1,5″, Rp 2″ and blow off pressure up to 3,5 bar. All safety relief valves are certified by DVGW and CE.
Safety Valve Medenus
Type : SL5
The spring-loaded safety relief valve SL 5 is used to reduce short-term pressure surges in front of gas consumption systems or to prevent an impermissibly high pressure increase when creeping gas quantities occur.
The safety relief valve SL 5 consists of the actuator housing and the functional unit “control unit”. When open, the gas flows through the actuator housing in the direction of the arrow. Via the internal measuring line connection, the pressure to be monitored is conducted to the bottom of the comparator diaphragm of the safety relief valve. This compares the actual value with the reference variable given by the force of the setpoint spring. The required setpoint value is adjusted via the adjusting screw. If the setpoint value is exceeded, the measuring unit lifts the final control element and allows gas to flow out via the blow-off line.
Other Product :
