All Product Danfoss

Danfoss Logo
Danfoss Ignition Units EBI4

EBI4-series of ignition

At low ambient temperatures it can be difficult to enable fast ignition of oil burners. As a solution we have created the EBI4, a series of high performance ignition units to increase ignition power in low temperatures.

The EBI4-series of ignition units fit a broad range of domestic burners and light commercial gas or oil burners and are setting new standards within modern ignition units for oil and gas burners, making them a very worthy successor of the very well-known Danfoss EBI series.

Complies with the RoHs and WEEE directives – EMC according to EN 55014-1 and EN 5514-2

 

  • High ignition performance under voltage.
  • 4-10% less oil consumption due to reduced soot built-up.
  • Highly robust against thermal overload.

Electronic Oil Burner Control OBC 82.10 

The microprocessor based control OBC 82.10 offers stable and precise timings independent of variations in supply voltage and ambient temperature. The control is undervoltage protected in accordance with EN 298:2012. In case of undervoltage the control will prevent the burner from starting and simultaneously show a flash code. Besides this, up to five other fault types can be read out as flash codes when the control is in lockout. The design complies with the requirements of the RoHS and WEEE directive

  • For 2 stage burners up to 30 kg/h
  • For burners with or without preheater
  • Precise and reproducible timings
  • Limitation at 3 restarts by flame failure within
    the same operating period
Danfoss oil control
Danfoss BFP 21

Danfoss BFP fuel pumps

Danfoss BFP fuel pumps are high-performance fuel pumps widely used in industrial burner and boiler systems to deliver precise and reliable fuel supply. Engineered by Danfoss, a global leader in fuel and combustion technology, these pumps are designed to maintain stable fuel pressure and consistent flow, which are essential for efficient and safe combustion. In oil-fired burners, the BFP pump ensures that fuel is delivered at the correct rate so that the burner can ignite properly and sustain a clean, efficient flame

  • Light oil, kerosene and biofuel blends hereof
  • 1 or 2-pipe operation
  • 1-stage
  • Built-in pressure regulator
  • Solenoid valve cut-off (BFP 21)
  • Cartridge filter
  • Bio compatible pressure and solenoid valve (Bio100 – version)