All posts by : admin

Jual Pressure Switch Fanal di Sulawesi – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch Fanal di Semarang – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch Fanal di Palembang – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch Fanal di Kalimantan – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch Fanal di Jakarta – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch Fanal di Bandung – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch Fanal di Aceh – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.

Jual Pressure Switch TIVAL ( FANAL ) FF 4-12 AAG  – The pressure of the medium being monitored by the sensor presses on a flat diaphragm, bellows, or piston (depending on the pressure range). A lever and spring system, using a cascade quick-action switch, allows for vibration-free switching. When there is no pressure on the sensor element, contact 1-2 closes. This can be used as an “ON” signal for a pump or compressor.

When the pressure exceeds the upper switching point, contact 1-2 opens and contact 1-4 closes. The connected motor is turned off. Contact 1-4 is often used as an “OFF” switch.

Contact 1-2 closes again when the pressure drops below the predetermined lower switching point. The upper and lower switching points can be adjusted independently using a screwdriver. Both switching points are clearly visible on the scale.

Application :

• Monitoring and controlling the pressure of liquids and gases
  in pipelines, boilers, pressure vessels, and equipment.