ADCA Valve
Steam Trap
Type BM20 Series
The ADCA BM20 series bimetallic steam traps and air eliminators are simple and robust traps, recommended for steam process applications where condensate sensible heat can be recovered, steam tracing lines, drip points, storage tank coils, steam air venting, etc. The use of condensate sensible heat reduces steam consumption.
Featured:
- Modulating discharge.
- Discharges condensate below steam saturation temperature.
- Excellent air discharge.
- Operates with superheated steam.
- Unaffected by water hammer and vibrations.
- Built-in strainer.
Pressure Control
Type PRV57 Series
The ADCA PRV57 pilot operated pressure reducing valves are designed for use with steam, compressed air, nitrogen and other gases compatible with the construction materials. The PRV57 can be installed in pressure reducing stations throughout all industries, and provide sensitive and accurate control even when inlet pressure fluctuations or relevant flow variations occur.
Featured:
- Precise control of downstream pressures from 0,07 bar to 17 bar.
- Robust steel or stainless steel construction.
- Suitable for dead end conditions.
- Guided piston and valve stem.
- Hardened plug.
Control Valve
Type PV 15 Series
The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils
Featured:
- Easy to service.
- Compact and cost-effective.
- Compact actuators with rolling diaphragm.
- High spring thrusts and stroking speeds.
- Yoke and stem coupling with mounting according to NAMUR (DIN
IEC 60534-6-1). - Ambient temperature from -10 to 80 ºC.
Vacum Breaker
Type VB17
The ADCA VB17 is a series of vacuum breakers designed to automatically relieve or “break” an unwanted vacuum condition. Applications include venting and vacuum limiting in pipelines, vessels, heat exchangers, autoclaves, steam boilers and other machines.
Application:
- Metallic wetted parts machined from 316L stainless steel bar stock.
- Regulating ranges from -0,05 to -0,95 bar.
- Compact design with easy access for cleaning and inspection
Other Product :
